Presently, almost all new personal computers come with SSD drives in place of HDD drives. You will see superlatives about them everywhere in the specialized press – that they’re a lot quicker and conduct far better and that they are actually the future of home computer and laptop generation.

Then again, how do SSDs fare in the hosting environment? Are they well–performing enough to replace the successful HDDs? At Top Hat Hosting, we’ll aid you much better understand the differences between an SSD and an HDD and determine the one that best suits you needs.

1. Access Time

Image

SSD drives give a fresh & progressive solution to file safe–keeping in accordance with the usage of electronic interfaces instead of any sort of moving components and spinning disks. This innovative technology is considerably quicker, enabling a 0.1 millisecond file accessibility time.

Image

HDD drives even now make use of the same fundamental data file access technique that’s actually developed in the 1950s. Despite the fact that it was significantly advanced consequently, it’s slow when compared with what SSDs are offering to you. HDD drives’ data access rate ranges somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is really important for the performance of any file storage device. We have executed in depth exams and have determined an SSD can handle at least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance steadily increases the more you use the disk drive. Having said that, as soon as it reaches a certain limitation, it can’t proceed faster. And due to the now–old concept, that I/O restriction is much less than what you could receive with a SSD.

HDD are only able to go so far as 400 IO’s per second.

3. Reliability

Image

SSD drives are made to include as less rotating parts as is practical. They utilize a similar technology like the one found in flash drives and are much more efficient compared to traditional HDD drives.

SSDs have an common failure rate of 0.5%.

Image

HDD drives make use of rotating hard disks for holding and reading info – a concept dating back to the 1950s. Along with hard disks magnetically hanging in mid–air, rotating at 7200 rpm, the prospect of something going wrong are usually higher.

The standard rate of failure of HDD drives ranges between 2% and 5%.

4. Energy Conservation

Image

SSDs are lacking moving elements and need hardly any cooling energy. In addition they need not much power to perform – trials have revealed that they can be powered by a normal AA battery.

As a whole, SSDs use up somewhere between 2 and 5 watts.

Image

HDD drives are known for getting loud; they can be more likely to getting hot and in case you have several disk drives within a web server, you’ll want a different air conditioning device simply for them.

All together, HDDs consume in between 6 and 15 watts.

5. CPU Power

Image

Because of SSD drives’ higher I/O efficiency, the key web server CPU can work with data file calls more rapidly and save time for additional operations.

The regular I/O delay for SSD drives is just 1%.

Image

When you use an HDD, you’ll have to spend time looking forward to the results of your data request. Consequently the CPU will be idle for further time, looking forward to the HDD to reply.

The common I/O delay for HDD drives is around 7%.

6.Input/Output Request Times

Image

The bulk of our new web servers moved to simply SSD drives. All of our tests have demostrated that using an SSD, the typical service time for any I/O request whilst doing a backup remains below 20 ms.

Image

In comparison to SSD drives, HDDs provide considerably sluggish service times for input/output calls. In a hosting server backup, the average service time for any I/O request can vary somewhere between 400 and 500 ms.

7. Backup Rates

Image

Yet another real–life advancement is the rate with which the backup is made. With SSDs, a web server backup now requires less than 6 hours using our hosting server–designed software.

Image

Throughout the years, we have got worked with mainly HDD drives on our web servers and we’re familiar with their overall performance. With a hosting server furnished with HDD drives, a complete hosting server back–up typically takes about 20 to 24 hours.

To be able to promptly boost the functionality of your web sites while not having to adjust any code, an SSD–powered website hosting solution will be a great solution. Have a look at the hosting packages and then the VPS servers – these hosting solutions feature extremely fast SSD drives and are offered at reasonable prices.

  • Service guarantees

  •  
  • Sign up now. There are no installation service fees you’ll also find total admin access to the server. 99.9% network availability is warranted.

  • Compare our prices

  •  
  • Quickly examine the quotas and capabilities supplied by all of our Virtual Private Servers. Find exactly which VPS Hosting configuration will give you exactly what you want to control your multi–media web presence easily.
  • Compare our hosting plans

  • Contact Us

  •  
  • Contact us 24x7 by email or by utilizing Top Hat Hosting’s ultra–fast ticketing platform. Our techs are going to reply to any questions within just 60 mins.